JDS Uniphase Wavetek DSAM-3500B, Быстрый старт

Страница: 59 / 88

Chapter 2 DSAM Meter Operation
Using AutoTests Mode
DSAM Product Family Quick-Start Guide Rev. 001 43
Each Combo AutoTest is based on two types of configura-
tion:
– The parameters or the selected channel plan
– The parameters of the selected limit plan
After a channel plan and a limit set has been selected,
press the
Start softkey and Combo AutoTest measures
the signal performance of all assigned channels in the
Combo Test configuration.
Using Video
Channels
AutoTest
To access the Video Autotest mode, use the arrow keys to
highlight the Video Channels option on the AutoTests
mode menu (
Figure 29 on page 42 ), and press Enter . The
first Video Channels screen you see will look similar to
Figure 31 on page 44 .
Figure 30 Combo Autotest Mode Screen