Chapter 6
Configuring Tests
Specifying test configuration settings
38
SmartClass ADSL/Copper Tester User’s Guide
When enabled, the ADSL/Copper Tester acts as a router and automati-
cally configures the IP addresses of attached equipment on the LAN inter-
face.
When disabled, the ADSL/Copper Tester operates as a client, which
enables automatic IP configuration of the LAN interface.
The LAN settings are configured.
Specifying ping settings
The following procedure describes how to specify ping settings.
To specify ping settings
1
Select
MODEM TEST
from the Main Menu.
2
Select
SETUP
.
3
Select
PING SETUP
.
4
Enter the
PING IP
.
This is the destination address (where you will send the pings). You may
enter the address as an IP address or the DNS name (such as
www.yahoo.com).
5
Enter the
TX PINGS
.
This is the number of ping messages to send.
To specify continuous ping, enter zero (0).
6
Select
PACKET SIZE
and enter a value between 64 bytes and 65K.
7
Select
TIMEOUT(s)
and choose the timeout period, in seconds.
The ping settings are configured.
Specifying web test settings
If your test set includes the Advanced IP option, you can verifying web connec-
tivity by downloading a web page. The following procedure describes how to
specify web test settings.
To specify web test settings
1
Select
MODEM TEST
from the Main Menu.
2
Select
SETUP
.
3
Select
ADVANCED
.
4
Select
WEB SETUP
.
5
Use the keypad and arrow keys to enter the destination URL.
When you enter a value, the cursor will move to the next position after a
one second pause.
The web test settings are configured.
Содержание SmartClass
