JDS Uniphase 4100 Скачать руководство пользователя страница 107

Страница: 107 / 182

Chapter 6

FTTA-SLM Software option

Saving the trace(s) and generating a report

User Manual

770000102/08

Changing the

name of an event

Once the

SmartLink

screen is displayed, the name of an event can be

modified:

Select the event to be modified (highlighted in yellow)

Press

Rename Event

menu key

In the edition keypad, enter a new name for the event

Click on

Enter

to return to

Event View

The event name is displayed under the icon, and replaces the
previous FTTA label

Saving the trace(s) and generating a report

Once the results page is displayed, the trace(s) can be saved and a
report can be generated directly from the results screen.

Saving and report can have been automatically generated if, in the file
configuration, the

Auto Store

parameter has been set to

Yes

(see

page 82

) with the appropriate

Save Mode

NOTE

The event is framed in red if it is above the alarm thresholds defined in
the setup menu.
It is framed in green if it lies within the thresholds.
It is framed in purple if no alarm has been defined for this type of event.

Fig. 54

Rename Event

MTS2100 4100 Module US rev08.book Page 87 Jeudi, 1. août 2013 1:43 13

Содержание 4100























































































































































































Результаты поиска

Содержание 4100

Отзывы:

JDS Uniphase 4100, Руководство пользователя, Страница: 107 / 182

Результаты поиска

Содержание 4100

Отзывы: