JDS Uniphase 2000 Platform, Руководство пользователя

Страница: 111 / 123

Chapter 11 Maintenance and Troubleshooting
Recycling Information
92 User Manual 790000002/00
Returning an
instrument
When returning an instrument, it is essential to indicate the following
minimum information:
– the type and serial number of the instrument (on the identification
label) and the configuration code (under the bar code)
– a description of the fault found on the instrument.
The returned instrument will then be repaired and calibrated.
Guarantee
conditions
Any repair operation supervening within the guarantee period of the
instrument will be carried out at the expense of JDSU. However, for any
sub-assembly upon which work has been carried out otherwise than by
JDSU Service Centers, the cost of a replacement sub-assembly will be
invoiced.
Recycling Information
JDSU recommends that customers dispose of their instruments and
peripherals in an environnmentally sound manner. Potential methods
include reuse of parts or whole products and recycling of products
components, and/or materials.
Waste Electrical and electronic Equipment (WEEE) Directive
In the European Union, this label indicates that this product should not
be disposed of with household waste. Il should be deposited at an appro-
priate facility to enable recovery and recycling.
Troubleshooting
Interpreting
alarms
Troubleshooting Solution
Nothing happens when the
O
N
/
O
FF
key is pressed.
- Make sure that the battery is present or charged; or
the mains adapter is properly connected (see
“Con-
necting the mains adapter” on page 16 ).
2000 Platform English rev00.book Page 92 Lundi, 20. juin 2011 1:47 13