Description of device
1.7.
The heated sample probe is used for continuous
sampling of gases containing dust and aerosols in
extractive analyzer systems. Water vapor and high
corrosive gases must be kept above their dew point to
prevent corrosion and sample degradation prior to
analysis or sample conditioning.
The sample probe is available in many different versions
to meet a wide variety of requirements.
The JES-301E1 & E1OS can be equipped with different
large-area, replaceable heated filter elements. The filter
element is mounted in an electrically heated stainless
steel housing covered by a thermally insulated weather
protection enclosure. The model series JES-301E1 &
E1OS is built to be equipped with various valves. The
sample probes can be built for different
temperature classes T3/T4. The temperature is
regulated by a maintenance free, self regulating PTC
heater elements with low temperature alarm. The heated
sample line JHX series is directly connected with a
moveable PG 42 cable conduit on the weather protection
enclosure. A universal mounting clamp is available to
connect other types of heated sample lines. For a correct
and optimal selection of various sample pipe
constructions and materials, our trained staff will be
pleased to assist you.
The sample probe consists of the heated filter head, Ex
heater, mounting flange, valves and mounting material,
which can be mounted horizontally or vertically. The
sample probe´s is mounted directly to a standard
process flange.
Upgrade Options
1.8.
With additional modules you may put together sample
probes according to most diverse requirements.
Upgrade options are factory-made product adaptations
which in most cases cannot be carried out by the
customer or on site.(Refer to chapter 13
for the technical
data)
Filter elements of various materials
Ceramic
•
Glass fiber
•
Stainless steel
•
Pyrex wool
•
Surface coated filter element
1.8.1.
The surface coated 0,2 µm filter element restrains the
sedimentation of dust and dirt on the filter surface.
Produktbeschreibung
1.7.
Die beheizte Gasentnahmesonde dient zur
kontinuierlichen Entnahme von staub- und aerosol-
haltigen Gasen bei extraktiven Analysensystemen.
Wasserdampf und hohe korrosive Gasfeuchte müssen
über dem Taupunkt gehalten werden, damit keine
Veränderung des Gases vor den Analysengeräten oder
der Probenaufbereitung stattfinden kann.
Die Gasentnahmesonde ist in vielen unterschiedlichen
Konfigurationen lieferbar, um unterschiedlichsten
Anforderungen gerecht zu werden.
Die JES-301E1 & E1OS ist mit unterschiedlichen
großflächigen, austauschbaren beheizten Filterelement
ausstattbar. Das Filterelement ist in einem elektrisch
beheizten Edelstahlgehäuse montiert und zusätzlich in
einem thermisch isolierten Wetterschutzgehäuse unter-
gebracht. Die JES-301E1 & E1OS Modellreihe kann mit
verschiedenen Ventilen ausgestattet werden. Die
Gasentnahmesonde kann für unterschiedliche
Temperaturklassen T3/T4 gebaut werden. Die
Temperaturregelung erfolgt durch eine wartungsfreie,
selbstregelnde PTC Heizung mit Alarmmeldung für
Untertemperatur. Die beheizte Messgasleitung der Serie
JHX wird direkt am Wetterschutzgehäuse der
Gasentnahmesonde über eine verschiebbare PG 42
Verschraubung montiert. Für die Montage anderer
Messgasleitungsstypen steht eine Montageschelle zur
Verfügung. Für eine korrekte und optimale Auswahl der
verschiedenen Entnahmerohre und Materialien steht
Ihnen unser geschultes Personal gerne zur Seite.
Die Gasentnahmesonde besteht aus dem beheiztem
Filterkopf, Ex Heizer, Montageflansch, Ventilen und
Montagematerial. Sie kann horizontal oder vertikal
montiert werden. Die Gasentnahmesonde wird direkt an
einem Standard-Prozessflansch montiert.
Erweiterungsoptionen
1.8.
Mit zusätzlichen Modulen lassen sich die Gasentnahme-
sonden genau an unterschiedlichste Anforderungen
anpassen: Upgrade Optionen sind werksseitig
durchgeführte Produktanpassungen welche in den meis-
ten Fällen weder kundenseitig noch vor Ort durchgeführt
werden können. (Technische Daten dazu finden Sie in
Kapitel 13)
Filterelemente aus verschiedenen Materialien
Keramik
•
Glasfaser
•
Edelstahl
•
Glaswolle
•
Oberflächenbeschichtetes Filterelement
1.8.1.
Das oberflächenbeschichtete 0,2 µm Filterelement
erschwert die Ablagerung von Staub- und Schmutz-
partikeln am Filterelement.
BA_DE_JES301E1_E1OS_v4.0
–––––––––––––––
[ 5 / 44 ]
–––––––––––––––––
Manual JES-301E1/V & JES-301E1OS/V
Содержание JES-301E1/V
