ASSEMBLY
5
Once everything is loosely in place on the door, install a spacer onto each
hinge. The taller spacer goes on the top hinge and the counter sunk side
should go down against the hinge.
6
Next, you can begin installing the doors. Set the hinge brackets onto the
top of the spacers. Then, insert the factory bolt into the top hole with the
factory washer. After that, thread the factory bolt into the bottom hinge
with one of the provided 5/16” USS washers between it and the door.
Once the bottom bolt is holding the door in place, thread a provided
M8 X 1.25mm nylock nut onto the bottom of the top bolt
Содержание BR6TD
Страница 4: ...INCLUDED PARTS 1L 1R 1L 1R 4x 4x 1L 1R 4 DOOR ...
Страница 5: ...INCLUDED PARTS 1L 1R 2x 2x 1L 1R 2 DOOR ...
