JCM GLOBAL iVIZION2 Series, Руководство по интеграции

Страница: 18 / 54

Section 2 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Specifications
P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
8
2 SPECIFICATIONS
This section provides specifications of the iVIZION™2 Series Banknote Validator (iVIZION2).
Technical Specifications
Table 5 iVIZION2 Technical Specifications
Bank
not
e
Acceptance Rate
*
:
*. The Banknotes accepted at the second attempt are included. The Acceptance Rate Test was conducted with more than 100 Banknotes. Refer to the “Software Information
Sheet” for each Country’s Acceptance Rate parameters.In cases of software with security components, such as anti-counterfeit-bill, the acceptance rate may be lower.
98% or greater (The following Banknote types are excluded)
•
Banknotes with excess or poor magnetism or unclear graphics
•
Double (dual) Notes
•
Dirty, scrubbed, wet, stained, torn, holed, worn-out, folded, or excessively creased
or wrinkled Banknotes
•
Banknotes having folded corners or edges
•
Banknotes having the wrong cut dimensions or printing displacement
•
Returned Banknotes because of incorrect or failed insertion.
Types Accepted:
Long side
SS Type: 110mm - 170mm (4.33 - 6.69 in.)
Short side: 60mm - 85mm (2.36 - 3.34
in.)
Insertion Direction
†
:
†. Refer to the “Software Information Sheet” for the supported denominations and the detailed Banknote insertion direction per currency.
Four-way
Ba
rcod
e T
icke
t
‡
:
‡. Refer to the “iVIZION2 Barcode Specifications” for more details.
Acceptance Rate:
98% or greater (The following Ticket types are excluded)
•
Barcodes having wrinkles or folds
Standard
Specification:
•
Read code: Interleaved 2 of 5 (TiTo)
•
Narrow Bar: 0.5mm - 0.6mm (0.019-0.023 in.)
•
Wide Bar to Narrow Bar ratio = 3:1
•
Characters: 18 Characters
•
Print Position: Middle (Divides a Ticket equally from the left, right, top and bottom
of the Ticket’s center)
•
Print Width: Wider than 10mm (0.39in.)
Insertion Direction: Four-way
2D Barcode
QR Code, PDF417 and Data Matrix
•
Minimum Module Size: 1mm x 1mm
“Bill-to-Bill”
Processing Speed
**
:
**. From Banknote insertion to capable of accepting a next Banknote. Excluded Host Communication time lag. The “from Banknote insertion to enable of next insertion” is a pro-
cessing speed per Banknote when 10 Banknotes are consecutively inserted. To change the mode, use the JCM Tool Suite app (“Utility” menu).
Normal Mode: 1.5 seconds or faster
Current Limit Mode (12V DC 3A): 1.9 seconds or faster
Escrow: 1 Note
Validation Method: Optical
Fraud Detection: Equipped (Anti-pullback System, Optical Detection)
Cash Box Type
††
:
††.A key and a lock are not included (A tang is provided). Refer to “Security Lock Installation” on page 12 for the installation. (1 Key Hole Cap is fitted in place to cover existing
holes when shipped).
Secure Cash Box
Intelligent Cash Box (ICB) (RFID available)
Cash Box Capacity
‡‡
:
‡‡.The number of Banknotes or Barcode Tickets stacked depends on its condition.
Standard Box: 500 Banknotes
Large Box: 900 Banknotes
Interface:
•
USB (USB Specification Rev. 2.0 Compliance) (Full Speed/12Mbps)
•
Photo-Coupler Isolation
•
RS232C
•
cc-Talk
•
TTL
Diagnostic Indicators: Power LED, Status LED, Bezel LED (Optional)