JCM GLOBAL iVIZION2 Series, Руководство по интеграции

Страница: 13 / 54

P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
3
General Information iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 1
Precautions
Definitions for Warning, Caution and
Note Signs
Definitions for General Symbols
User Cautions
Careful measures were taken in the design of this
product to ensure its quality; however, the follow-
ing cautions pertain to all users and should be fol-
lowed for safe operation.
Installation
Mounting, Dismounting & Transportation
Indicates a hazardous sit-
uation that, if not avoided,
could result in death or
serious injury.
Indicates a hazardous sit-
uation that, if not avoided,
could result in minor or
moderate injury and/or
equipment damage.
Indicates information
considered important to
perform and function
optimal. Read carefully to
prevent malfunctions or
improper operation.
Signifies a general prohibition
(prohibited action)
Signifies a mandatory action
Signifies a general warning
WARNING
Careful measures were taken in the
design of this product to ensure its
quality; however, ensure that a fail-
safe design is used for the Host
Machine to assure safety.
WARNING
Do not use the Unit where it may be
exposed to airborne evaporated or
sporadic chemicals and/or oil.
This unit is not designed for outdoor
installation. Be sure the Host Machine
contains enough protection to avoid
wet or dusty conditions when install-
ing it in both open-air and indoor
spaces.
WARNING
CAUTION
NOTE
CAUTION
•
Do not allow the Unit to endure a
range of temperature and humidity
beyond the environmental limits
specified (Refer to “Environmental
Specifications” on page 9).
•
Do not use the Unit in environments
that may be subject to extreme tem-
perature changes.
•
Be sure the Host Machine is
designed with careful consideration
for retrieving a Banknote and/or
cleaning a Banknote jam.
•
Be sure to connect the Frame
Housing to the Frame Ground of
the Host Machine (Refer to
“Grounding” on page 11).
•
Be careful not to use excessive out-
side pressure on the Unit, or sub-
ject it to excessive vibration during
transportation.
•
Ensure that the Host Machine is
designed considering the risk of
electronic components that can
cause induced noise. The noise
generated by the components on
the Host Machine may affect and
degrade the Validation perfor-
mance.
•
Ensure that the power cables com-
ply with the recommended specifi-
cations to avoid reset. (Refer to
“Recommended Wires” on
page 14).

Cut off all the not-connected
unused cables to avoid static elec-
trical effects or short circuit possi-
bilities that could cause damage to
the Unit.
WARNING
Disconnect Main Plug
From Electrical Outlet
Be sure to remove electrical power
from the Unit and disconnect a USB
Cable before mounting or removing
the Unit including any optional or sub
assembly.
Do not carry the Unit by holding the
Cash Box. The Cash Box accidentally
becomes disassembled and drops
away.