![background image](http://html2.mh-extra.com/html/jcb/tm320/tm320_operators-manual_4825124012.webp)
3
3
9821-3100-6
Introduction
About this Manual
Machine Model and Serial Number
This manual provides information for the following
model(s) in the JCB machine range:
TM320, TM320S and TM320WM from machine serial
number 2090867.
Using this Manual
T1-044
This manual is arranged to give you a good understanding
of the machine and its safe operation. It also contains
maintenance information and specification data. Read this
manual from front to back before using the machine for the
first time. Particular attention must be given to all the safety
aspects of operating and maintaining the machine.
If there is anything you are not sure about, ask your JCB
distributor or employer. Do not guess, you or others could
be killed or seriously injured.
General warnings in this chapter are repeated throughout
the book, as well as specific warnings. Read all the safety
statements regularly, so you do not forget them.
Remember that the best operators are the safest
operators.
The illustrations in this manual are for guidance only.
Where the machines differ, the text and or the illustration
will specify.
This manual contains original instructions, verified by the
manufacturer (or their authorised representative).
The manufacturer's policy is one of continuous
improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will
be accepted for discrepancies which may occur between
specifications of the machine and the descriptions
contained in this publication.
All optional equipment included in this manual may not be
available in all territories.
Left Side, Right Side
In this manual, 'left'
A
and 'right'
B
mean your left and right
when you are seated correctly in the machine.
C087420
Fig 1.
Cab/Canopy
T1-003_2
This manual frequently makes references to the cab. For
instance, 'do not operate the machine without a manual in
the cab'. It should be noted that these statements also
apply to canopy build machines.
Cross References
T1-004_2
In this publication, page cross references are made by
presenting the subject title printed in bold, italic and
underlined. It is preceeded by the 'go to' symbol. The
number of the page upon which the subject begins, is
indicated within the brackets. For example:
K
Cross
References (
T
3)
.
Содержание TM320
