jcb JS145W Скачать руководство пользователя страница 9

Страница: 9 / 51

01 - Machine

03 - Safety

03 - Safety - Yours and Others

01 - 3

9813/2650-3

01 - 3

03 - Safety - Yours and Others
Introduction

All machinery can be hazardous. When a machine

is correctly operated and maintained, it is a safe

machine to work with. When it is carelessly operated

or poorly maintained it can become a danger to you

(the operator) and others.

In this manual and on the machine you will find

warning messages, read and understand them. They

inform you of potential hazards and how to avoid

them. If you do not fully understand the warning

messages, ask your employer or JCB dealer to

explain them.

Safety is not just a matter of responding to the

warnings. All the time you are working on or with the

machine you must be thinking of what hazards there

might be and how to avoid them.

Do not work with the machine until you are sure that

you can control it.

Do not start any work until you are sure that you and

those around you will be safe.

If you are not sure of anything, about the machine or

the work, ask someone who knows. Do not assume

anything.

Remember:

•

Be careful

•

Be alert

•

Be safe.

Find manuals at https://best-manuals.com

Содержание JS145W




















































Результаты поиска

Содержание JS145W

Отзывы:

Похожие инструкции для JS145W

Бренды по названию

Популярные бренды

jcb JS145W, Руководство по обслуживанию

Результаты поиска

Содержание JS145W

Отзывы:

Похожие инструкции для JS145W

Бренды по названию

Популярные бренды