![background image](http://html1.mh-extra.com/html/jcb/214e/214e_service-manual_3558195818.webp)
20 - 1
Section G
9803/3280
Section G
20 - 1
Issue 1
Service Procedures
Service Brakes
Brake Light Switch - Adjustment
1
Select the starter key switch to the ON position, do not
start the engine.
2
With the brake pedal in the return position, adjust
locknuts
B
and use feeler gauges to set the proximity
switch
A
so that there is clearance of 2mm MIN - 3mm
MAX between the end of the switch and the brake
pedal lever. The light emitting diode (L.E.D.) on the
switch should be illuminated.
3
Secure the switch in position by tightening locknuts
B
.
4
Depress the brake pedal and check the correct
operation of the brake lights.
Torque Settings
Item
Nm
kgf m
lbf ft
B
29
2.95
21
A
B
B