![background image](http://html1.mh-extra.com/html/jcb/214e/214e_service-manual_3558195253.webp)
38 - 4
Service Procedures
Seat Arms Control Lever - Adjustment
In some instances it may be necessary to adjust the
operation of the arms raise/lower control lever
1
.
When the button
2
is depressed upwards fully, the arms are
released for raise/lower. If the arms are not released, or
release but re-lock when the button is fully depressed,
adjust the control lever as follows:
If the arms do not release
1
Slacken lock nut
3
and screw the stop bolt
4
out (anti-
clockwise). Test the operation of the control lever and
then tignten the lock nut
3
.
If the arms release but re-lock
1
Slacken lock nut
3
and screw the stop bolt
4
in
(clockwise). Test the operation of the control lever and
then tighten the lock nut
3
.
Section D
9803/3280
Section D
38 - 4
Issue 1
Precision Control (Servo)
A402560
3
4
1
2