jcb 1CX, Руководство по обслуживанию

Страница: 35 / 242

Section 3
4 - 1
Loader Arm Safety Strut
Installing
! !
WARNING
Raised loader arms can drop suddenly and cause
serious injury. Before working under raised loader arms,
fit the loader arm safety strut.
2-1-1-6
! !
WARNING
You could be killed or seriously injured if the loader
control is accidentally operated. Make sure that no-one
goes near the machine whilst you fit the safety strut.
16-3-1-5
1 Empty the shovel or attachment, if appropriate, and
raise the loader arm enough to fit the safety strut.
2 Stop the engine.
3 Fit the strut:
a Remove the strut from its stowage position C.
b Place the strut around the lift ram.
c Secure the strut A into position using strap B.
4 Start the engine.
5 Slowly lower the loader arm onto the safety strut. Stop
the movement immediately the weight of the arm is
supported by the strut.
Note: Extreme care must be taken when lowering the loader
arm onto the safety strut. 'Feather' the lever to lower the
loader arm slowly.
Removing
! !
WARNING
You could be killed or injured if the loader control is
accidentally operated. Make sure no-one comes near
the machine while you remove the safety strut.
2-3-1-3
1 Make sure that the drive control lever is in the neutral
(rest) position.
2 Raise the loader arm to take the weight off the safety
strut A. Stop the engine.
3 Remove the strut:
a Release securing strap B.
b Remove the safety strut from the lift ram.
c Return the safety strut to its stowage position C.
Section 3 Routine Maintenance
9803/8550
4 - 1
Issue 1
203851
202720
C
B
A
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk