6
JBL VLA-C SERIES
| USER’S GUIDE
2.3 - ATTACHMENT TO STRUCTURES
A licensed Professional Engineer must approve the placement and method of attachment to the
structure prior to the installation of any overhead object. The installation of the hardware and
method of attachment must be carried out in the manner specified by the Professional Engineer.
Improper installation may result in damage, injury or death.
CAUTION: Installation must be done by
qualified persons using safe rigging standards.
The installer is responsible for proper selection and use of mounting
hardware to properly and safely suspend the speakers.
2.4 - IMPORTANT SAFETY WARNING
The information in this section has been assembled from recognized engineering data and is
intended for informational purposes only. None of the information in this section should be used
without first obtaining competent advice with respect to applicability to a given circumstance.
None of the information presented herein is intended as a representation or warranty on the
part of JBL. Anyone making use of this information assumes all liability arising from such use.
All information presented herein is based upon materials and practices common to North
America and may not directly apply to other countries because of differing material dimensions,
specifications and/or local regulations. Users in other countries should consult with appropriate
engineering and regulatory authorities for specific guidelines.
Correct use of all included hardware is required for secure system suspension. Careful
calculations should always be performed to ensure that all components are used within their
working load limits before the array is suspended. Never exceed the maximum recommended
load ratings.
