background image

INCLUDED

THANK YOU FOR CHOOSING JBL

For more than 60 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to
the recordings you play in
your home, car or office.

We’re confident that the JBL
speaker you’ve chosen will
provide every note of enjoy-

ment that you expected –
and that when you think
about purchasing additional
audio equipment for your
home, car or office, you will
once again choose JBL.

Please take a moment to
register your product on our
Web site at www.jbl.com. 
It enables us to keep you

posted on our latest advance-
ments, and helps us to better
understand our customers
and build products that 
meet their needs and 
expectations.

JBL, Incorporated

One SCSSAT300 or one SCSSAT200 with wall-
mount bracket, shelf stand and floor stand
adapter. 

One 40' (12m) speaker cable.

In addition, there are two hardware bags
included. Hardware Bag A contains the metal
tightening bar and screws for the shelf stand.
Hardware Bag B contains screws for the floor
stand adapter and parts for the wall-mount
bracket.

SCS SAT300
SCS SAT200

SURROUND CINEMA
SPEAKERS

OWNER’S GUIDE

®

SCS-SAT300/200 OM  5/24/06  12:41 PM  Page 3

Содержание SCSSAT300









Отзывы: