background image

12

y

to select the channel being adjusted,

followed by the 

Set Button

. You may 

then use the 

/

¤

Buttons 

y

again to

change the level for that channel. Press the

Set Button

to lock in the setting.

When using the DVD600

II

to play a DVD disc,

this button functions as a Title button, and dis-
plays the disc’s Title Select Menu, or a symbol
(

) if the disc either does not offer this func-

tion or has only one title.

When the Video 2 input has been programmed
for a cable or satellite service, this button will
access the service’s programming guide, if the
service is active.

y

:

Used to change or scroll through items

in the on-screen menus, or to change configu-
ration settings, such as output levels. When
changing an item such as the surround mode
or digital input directly, first press the function
or mode to be changed, such as Surround
Mode or Digital Input, and then press this button
to scroll through the list of available choices. In
DVD mode, press this button to skip to the
next higher chapter of the current disc.

z

Menu:

Used only with video sources.

When DVD is selected, pressing this button
while a DVD disc is playing stops playback and
displays the disc’s menu. When the unit is
stopped, pressing this button displays the DVD
player’s Setup Menu. 

`

:

Used to change the menu selection 

or setting during some of the setup or other
procedures. In DVD mode, press this button to
play the current disc in Fast Reverse mode.

Set:

Used to enter settings into the mem-

ory of the DCR600

II

, DVD600

II

or video device

selected. Also used in the setup procedures for
delay time, speaker configuration and channel
output level adjustment. When the DVD600

II

has been selected, pressing this button will
select the item that is highlighted in the Status
Banner, or in the on-screen menu displayed by
a DVD disc. When the Status Banner has not
been activated, pressing this button will alter-
nately Play or Pause the current disc. When
the On Screen Library is displayed on-screen,
pressing this button will begin play of the 
currently selected disc. 

:

Used to change the menu selection 

or setting during some of the setup or other
procedures. In DVD mode, press this button to
play the current disc in Fast Forward mode.

Digital/Subtitle/Exit:

When the DCR600

II

is selected, press this button to assign one of
the digital inputs to a source. When the 

DVD600

II

is selected, this button is used to

change the subtitle choice. For other video
devices, it exits the menu.

¤

:

Used to change or scroll through

items in the on-screen menus, or to change
configuration settings, such as output levels.
When changing an item such as the surround
mode or digital input directly, first press the
function or mode to be changed, such as 
Surround Mode or Digital Input, and then 
press this button to scroll through the list of 
available choices. In DVD mode, press this but-
ton once to return to the beginning of the cur-
rent chapter or track, and twice to skip to the
next lower chapter or track of the current disc.

Delay/Return/Prev Ch.:

Begins the

process for setting the delay times used by the
DCR600

II

when processing surround sound.

After pressing this button, the delay times are
entered by pressing the 

Set Button

and

then using the 

/

¤

Buttons

y

to

change the setting. Press the 

Set Button

again to complete the process.

This button is also used when viewing a menu
display from a DVD disc. Press it to return to
the previous menu screen.

When the 

Video 2 Input

fl‡

has been pro-

grammed for a cable or satellite service, this
button will skip to the previous channel.

,

Numeric Keys:

These

buttons serve as a ten-button numeric keypad
to enter tuner preset positions. They are also
used with the DVD600

II

to directly access a

disc (when pressed within 3 seconds after the

Disc Skip Button

) or track (when

pressed while a disc is playing), to enter data
for sequential programming, to enter or change
the access password for parental control, to
enter a language code, or to respond to menu
options presented by a disc. When the TV or
another video device is selected, they are used
to select channel numbers. They may also be
used to select track or chapter numbers when
playing a CD or DVD.

Tuner Mode/Angle:

Press this button

when the tuner is in use to select between
automatic tuning and manual tuning. When 
the button is pressed so that the 

AUTO

Indicator

T

goes out, pressing the 

Tuning

Buttons

8

will move the frequency

up or down in single-step increments. When
the 

AUTO Indicator 

T

is lit, pressing the

Tuning Buttons 

8

will cause the

tuner to search for the next station with an
acceptable signal. When the FM band is in
use, pressing this button when a station’s sig-
nal is weak will change to monaural reception. 

When a DVD encoded with multiple-angle
information is playing, press to change the
angle in use. This function is only available 
on discs that are specially prepared to take
advantage of the multiple-angle function, and
only for those parts of the disc that are recorded
with multiple-angle content. The DVD600

II

will

display a camera icon on the screen to indicate
when this feature is available.

Memory:

Enters a radio station into the

DCR600

II

’s preset memory. Once the 

MEMORY

Indicator

Q

flashes, you have five seconds

to enter a preset memory location using the

Numeric Keys

,

. Repeat

the process to enter additional stations.

Tuning Up/Down/Step (Frame

Advance) Buttons:

When the tuner is in use,

these buttons will tune up or down through the
selected frequency band. If the 

Tuner Mode

Button

@

has been pressed so that the

AUTO Indicator

T

is illuminated, pressing

either of the buttons will cause the tuner to
seek the next station with acceptable signal
strength for quality reception. When the 

AUTO

Indicator

T

is NOT illuminated, pressing

these buttons will tune stations in single-step
increments.

When a DVD disc is playing, press these 
buttons to move forward or backward one
frame at a time. Press the 

Play/Pause Button

to resume normal play. These 

buttons do not function when a CD is playing.

Direct/Program Button:

Pressing this

button in tuner mode, or while a CD or DVD is
playing, starts the sequence for direct entry of
a station’s frequency, a CD track or a DVD chap-
ter. After pressing the button, simply press the
proper 

Numeric Keys

,

to

select a station, track or chapter. You may also
skip to a track or chapter by entering its number,
without first pressing the 

Direct Button

.

When the DVD600

II

is stopped, press this 

button to display the program menu and enter
a programmed play sequence. When a disc is
playing, press to switch between normal play
and programmed playback, if a playlist has
been programmed.

Clear Button:

Erases incorrect entries

when using the remote to directly enter a radio
station’s frequency.

When the DVD600

II

has been selected, press

this button to remove the Status Banner or
other displays from your video screen. This
button is also used to clear items from 
programmed playlists.

   

DVD600II 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

Содержание DVD600 II
































































Отзывы: