![JBE CCTV IPHD-922 Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/jbe-cctv/iphd-922/iphd-922_quick-start-manual_3495253001.webp)
SHENZHEN JBE CCTV CO.,LTD
SHENZHEN JBE CCTV CO.,LTD
5/F,Workshop Building A,Tozia Industrial Park,Lezhujiao,
Huangmabu Community,Xixiang Street,Bao'an District,Shenzhen,Guangdong,China
Email:[email protected] Tel:+86 0755 23037680
◆
Metal Bullet Camera.
◆
1/2.8" SONY Starlight CMOS Sensor.
◆
2.0 Megapixel 1080P@20FPS.
◆
PWM Smart LED Warm Light + Array IR :2pcs
◆
Built-in 3MP Blacklight 3.6mm Fixed Lens.
◆
IP66 Weatherproof Standard.
◆
Support Onvif,POE Optional.
◆
Audio in/out Optional.
(1) Do not use this product falls on the ground or the strong tapping;
(2) Unless the instructions, otherwise do not disassemble the machine itself
;
(3) Before use, please determine whether the power supply for the specified voltage;
(4) Aim to avoid strong light (such as sunlight, lighting, etc), otherwise easy to cause a
bright or light phenomenon (this is not a fault), will also affect the CMOS Sensor life;
(5) Avoid in damp, dusty, hot, cold, strong electromagnetic radiation, etc;
(6)If found abnormal situation,please unplug the power and contact us.
(7) Lightning protection earth wire should be grounded to the nearest.
(1) Make sure the power supply voltage is correct: DC12V, inside outside is negative
(2) Using CAT5/CAT6 cable to transmit video signal to the monitoring equipment.
(3) Choose the right place to fix the camera.
(4) Connect the power and adjust the camera Angle come into view in the position of
the target.
Smart Warm Light LED IP Camera
IPHD-922
Features:
Installation note:
Installation and operating instructions: