Jayco NORTH POINT 2023, Руководство пользователя

Страница: 50 / 181

44
Section 4: Vehicle Operation
™
NOTE: The gears can be stripped out if the stab jack is manually retracted/
extended to its fullest extent and the operator continues to rotate the manual
override.
Emergency Stopping
Always carry road flares or reflective warning signs. Pull off the roadway as far as possible
for emergency stopping. Turn ON your vehicle hazard warning flashers. If traveling at night,
use three red warning indicators such as flares, reflectors or lanterns as required by the Uni
-
form Vehicle Code and Model Traffic Ordinance.
™
NOTE: Curves and/or hills may affect the safe placement of warning indica-
tors.
For personal safety, always stand off the road and out of the way of traffic.
Emergency Towing
If your recreational vehicle needs to be towed, please contact an emergency road service
provider or a qualified service facility for assistance.
Never allow anyone to go under the recreation vehicle while it is being lifted
and/or being towed.
Wheel Lugs
After your first trip, check the wheel lug torque periodically for safety.
Lugs should be checked:

After winter storage

After a wheel removal

Before starting a trip

Following extensive braking
Lug nuts should be tightened in two stages. Lugs should be started by hand, then torqued to
intermediate values (Stage 1) on the chart then torqued according to the final torque values
on the chart.Refer to the Wheel Lug Nut Diagram below.

Use the correct star pattern sequence to attach the recreation vehicle wheels.

Start all nuts by hand to prevent cross threading.

Tighten the nuts in the sequence shown.
Table of Contents