Jayco Kiwi Too Travel Trailer 2003, Руководство пользователя

Страница: 49 / 55

89 88
MAINTENANCE CHECKLIST
Prior to First Trip
G
Check the LP gas lines for leaks. Refer to Chapter 4.
G
Test the LP gas detector. Refer to Chapter 4.
G
Sanitize the fresh water system. Refer to Chapter 4.
G
Check wheel nuts at specified intervals to listed torque values. Re-torque as
needed. Refer to the axle manufacturer’s manual or Chapter 3.
G
Open all windows and the door and start the furnace. Leave the windows and
door open and the furnace on until the odor from the initial use of the furnace
is fully dissipates.
G
Season the tent portions of the unit. Refer to Chapter 3.
First Ten, Twenty-Five and Fifty Miles
G
Check wheel nuts at specified intervals to listed torque values. Re-torque as
needed. Refer to the axle manufacturer’s manual or Chapter 3.
First Two-Hundred Miles
G
Check wheel nuts at specified intervals to listed torque values. Re-torque as
needed. Refer to the axle manufacturer’s manual or Chapter 3.
G
Have the brakes adjusted by a qualified service technician.
Each Trip
G
Test the LP gas detector. Refer to Chapter 4.
G
Inspect the bed bow supports.
G
Check the battery water level. (If equipped with battery.)
G
Check the brake fluid level in th emaster cylinder reservoir. Keep it filled to
within ½” from the top of the reservoir. (Hydraulic brake option only)
G
Check the master cylinder cap for tightness. (Hydraulic brake option only)
G
Check the tire pressure and wear. Make sure the tires are cold when checking
tire pressure.
G
Check the running lights.
G
Inspect the safety chains for signs of wear.
G
Test the brakes.
After Every Tire Change
G
Tighten the lug nuts to specified torque values at 10, 25 and 50 miles (16, 40
and 80 kilometers) to assure they are correctly “seated” after the tire change.
Refer to the axle manufacturer’s owner’s manual or Chapter 3.
Fig. 8-7
Kiwi Travel Trailer
1. Moldings 4. Windows
2. Vents 5. Exterior Attachments
3. Slideout Trim 6. Marker & Tail Lights