Jayco JAY FLIGHT BUNGALOW Towables 2021, Руководство пользователя

Страница: 84 / 165

82
Section 6: Electrical System
Motors page shows all of the slideouts and awnings.
HVAC page operates the AC temperature in the RV.
Energy page
shows the generator controls.
Settings page shows pairing, temperature units, software version, forget all (disconnects
paired devices).
Tire Pressure Monitor System:
If your RV is equipped with a Tire Pressure Monitoring System (TPMS), please refer to a
separate section in the Table of Contents. The TPMS settings can only be displayed and
changed via the smartphone app. There is no provision for TPMS on the mini control dis-
play mounted inside the RV.
For complete detailed operating instructions for the BMPro Mini System refer to the BMPro
owners manual in your warranty packet.
LCI One Control® App(if so equipped)
Certain models of RVs include a Bluetooth control
module that works in concert with the LCI One Con-
trol App for your smartphone, tablet or other smart
device. When connecting to this app, certain sys-
tems in your RV can be controlled remotely from
your smart device. The free app is available through
Google Play Store or the App Store (for IPhone).
The One Control Device Selection screen will look
similar to (Fig 1).
The One Control System will NOT operate the hall
light, lights located inside each slide-out, exterior am-
ber/red marker lights, or the LED lights located on the
front or rear caps.
Connecting to the Bluetooth Control module:
A Bluetooth control module is mounted in the basement
area of the RV. It transmits a Bluetooth signal for the
LCI One Control app. A Password and a Device Name
are required for this Bluetooth connection. The Pass-
word and Device Name can typically be found on a label located inside a cabinet near the
entrance door of the RV
(Fig 2)
. The password and device name will also be located on a
label on the control module in the basement area although this may not be easily accessible.
The password is 6 numerical digits. Device name will be LCIRemotexxxxxxxxx (x’s are
9 alpha numeric characters). To connect: enable Bluetooth on your smart device, scan for
available Bluetooth connections, and you should see the LCIRemotexxxxxxxxx name ap-
pear as a connection. Select that, and it should then prompt for the 6 digit password.
NOTE: Not all the functions depicted here will necessarily be available on
your model RV. The systems shown are only a possible representation of
what you could see on your smart device. If specific apps are not displayed
on your device they are not installed and may not be available for your RV.
Table of Contents Maintenance Record