Jayco JAY FEATHER Towables 2021 Скачать руководство пользователя

Страница: 47 / 177

Section 4: Vehicle Operation

Your RV may be equipped with one (or two) sets of the

Stowable Entrance Steps. With these steps, there is no ac-

cessible steps mounted on the exterior of the RV. They are

a one piece solid (3 or 4 step) assembly that latches inside

the doorway of the RV. The steps rotate down and out of

the doorway, and include two adjustable feet to provide

stability while parked on rough terrain. The step assembly

weighs 17 lbs. and has a weight capacity of 500 lbs.

Step operation

1. Open the entrance/screen door all the way.

2. Twist the locking handle to release the steps from the

locked position on the door frame (

3. Lower the step assembly to the ground

(B)

4. Adjust the feet to stabilize the steps (

5. Remove pins (

) on each side of the step to adjust

the legs, then reinsert the pins to lock the legs.

Step storage

6. Fold the handrail at the door out of the way or re-

move the optional step handrail (if so equipped).

7. Pull pins from adjustable legs (

), and retract the

legs so they fit inside the doorway when steps are

folded. Reinsert the pins to lock the legs.

8. Lift the steps and rotate up into the doorway.

9. Steps will automatically latch into brackets on each

side of the door frame as they are lifted in place.

10. Close the entrance/screen door

NOTE:

Certain models may have dual gas struts built into the step

mechanism make the steps very easy to raise and lower in place.

Entrance Door

Always hold onto the entrance door when opening or closing it. Damage caused because

you failed to do so is not covered by the

Limited Warranty.

The entrance screen door may be equipped with a slide panel that allows access to the en-

trance door handle and locks. The entrance door may also be equipped with both a regular

door lock and a dead bolt lock.

Make sure the entrance door is completely closed and locked when traveling.

Locking the door helps prevent it from opening unintentionally and keeps in-

truders from your recreation vehicle.

Table of Contents

Maintenance Record

Содержание JAY FEATHER Towables 2021


















































































































































































Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды

Jayco JAY FEATHER Towables 2021, Руководство пользователя

Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды