Jayco JAY FEATHER Towables 2021 Скачать руководство пользователя

Страница: 39 / 177

Section 3: Pre-Travel Information

Travel Trailer Hitch Height and Hitch Ball

To determine the hitch height for your model, make sure that the

trailer is level. When the loaded RV is hitched to the tow vehicle,

check the hitch ball height. This can be determined by measuring the

distance from the center of the hitch ball to the ground. Record this

number in the box for future reference.
Adjust the equalizing bars of the hitch assembly so that the tow ve-

hicle and the trailer are essentially level. A high hitch will transfer weight behind the axles

and cause the vehicle to fishtail. A low hitch will transfer additional weight to the hitch.

Refer to the hitch manufacturer instructions to adjust the weight-distributing hitch to the

proper height.
If you have additional questions, consult with your dealer. Make certain your Dealer is

aware of the tow vehicle you are using so a compatible hookup is achieved. Depending on

the model, your required travel trailer hitch ball diameter is either 2” or 2-5/16” (consult

your dealer for assistance).

Travel Trailer Hitching Procedure

The following procedure will help to assist you in securely hooking up your recreation ve-

hicle to your tow vehicle.
1. Make sure the trailer wheels are blocked.

2. Turn the tongue jack crank to raise the travel trailer tongue above the hitch ball.

3. Open the coupler latch on the travel trailer hitch.

4. Back the tow vehicle into the proper position.

5. Turn the tongue jack crank to lower the coupler onto the hitch ball.

6. Close the coupler latch after it is completely seated.

7. Install the (customer supplied) weight distributing bars (equalizers) as directed by the

OEM.

8. Remove the dolly wheel or platform and retract the tongue jack to its maximum height.

9. Attach the breakaway switch cable to the tow vehicle.

10. Attach the safety chains.

11. Plug in your wire harness/connector plug from the tow vehicle to the travel trailer.

12. Walk around the RV to verify exterior lights are working correctly.

13. Remove the trailer wheel blocks.

Travel Trailer Weight Distributing System (customer supplied)

This system provides a more stable tow vehicle/RV combination as it will spreads the weight

evenly to distribute it to the tow vehicle front and rear axles and the trailer axle. Consult

with your dealer for information on requirements and operation of this system. Be certain

your tow vehicle can carry the hitch weight.

This unit hitch

height is:

NOTE:

If an Atwood brake actuator is used with an equalizing hitch, be

sure the hanger chains hang between straight down and forward up to

34°. Do not use less than 6-1/2” hanger chain length. For optimum brake

performance, hang chains forward 34°. Refer to the manufacturer’s owner’s

manual for more information.

Table of Contents

Maintenance Record

Содержание JAY FEATHER Towables 2021


















































































































































































Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды

Jayco JAY FEATHER Towables 2021, Руководство пользователя

Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды