Jayco JAY FEATHER Towables 2021 Скачать руководство пользователя

Страница: 139 / 177

137

Section 10: Appliances

Never use the microwave cavity for storage. The microwave cavity should

always be empty when not in use.



To prevent damage, remove the turntable from the microwave when trav-

eling.



Make sure you are connected to a 120-volt power source.

Cooking Safety

In Case Of a Grease Fire

Grease is flammable. Never allow grease to collect around top burners or on the cook top

surface. Wipe up spills immediately. Refer to Section 2 – Safety Precautions, for fire safety

and fire extinguisher information.

Do not attempt to use water to put out the fire. Water can spread some types of

fire, and electrocution is possible with an electrical fire.

Microwave

For details on operation, cleaning and safety information, refer to the manufacturer’s user

guide.

General Cleaning Microwave and Convection Microwave

IMPORTANT:

Before cleaning, make sure all controls are off and the microwave oven is

cool. Always follow label instructions on cleaning products.
To avoid damage to the microwave oven caused by arcing due to soil buildup keep cavity,

microwave inlet cover, cooking rack supports, and area where the door touches the frame

clean.
Clean with mild soap, water and a soft cloth or sponge, or as indicated below.

 Grease filters: mild soap and water or dishwasher.



Door and exterior: mild soap and water, or glass cleaner applied to paper towel.



Control panel: sponge or soft cloth and water.



Stainless steel (on some models): mild soap and water, then rinse with clean water

and dry with soft cloth, or use stainless steel cleaner.



Turntable: mild soap and water or dishwasher.



Rack(s): mild soap, water and washcloth. Dishwasher cleaning is not recommend-

ed.

Convection Microwave (if so equipped)

The convection microwave bridges the gap between microwaving your food and conven-

tional cooking. Make sure there is sufficient 120-volt power before operating the convection

microwave (see

Calculating Electrical Load).

or details on operation and safety informa-

tion, refer to the manufacturer’s user guide.

Table of Contents

Maintenance Record

Содержание JAY FEATHER Towables 2021


















































































































































































Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды

Jayco JAY FEATHER Towables 2021, Руководство пользователя

Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды