Jayco JAY FEATHER Towables 2021 Скачать руководство пользователя

Страница: 138 / 177

136

Section 9: Heating & Cooling

NOTE:

For RV models with touch screens, the powered roof vent(s) may

be controlled on one of the selectable screens on the touch screen.

Furnace

The furnace installed in your recreation vehicle is controlled by a 12-volt DC thermostat.

Depending on your model, there may be up to two thermostats enabling you to control the

temperature to your comfort level.
The furnace requires both 12-volt power and propane gas for full operation. Make sure you

have sufficient power available before operating your furnace.
If you have any questions contact your dealer or Customer Service. A qualified RV techni

cian should perform all furnace maintenance at least once a year (more often depending on

furnace usage). Never attempt to repair the furnace yourself.

Ducting and Return Air

All heat discharges, registers and return air grills must be free and clear of obstructions.

This includes all closeable registers that are intended to reduce airflow, do not shut it off

completely.



The furnace should be inspected periodically (monthly during the heat-

ing season) for presence of soot on the vent. Soot is formed whenever

combustion is incomplete. This is a visual warning that the furnace is op-

erating in an unsafe manner. If soot is observed on the vent, immediately

shut the furnace OFF and contact a qualified service agency. Operating

the furnace under this condition could lead to serious property damage,

personal injury or loss of life.



To ensure your personal safety, do not obstruct or alter the furnace in any

manner. Do not install screens over the vent for any reason. Screens will

become restricted and cause unsafe furnace operation. For your safety,

only the manufacturer’s factory authorized parts should be used on your

furnace.

NOTE:

For RV models with touch screens, the furnace controls may be

included on the selectable menu screens of the touch screen.

Table of Contents

Maintenance Record

Содержание JAY FEATHER Towables 2021


















































































































































































Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды

Jayco JAY FEATHER Towables 2021, Руководство пользователя

Результаты поиска

Содержание JAY FEATHER Towables 2021

Отзывы:

Похожие инструкции для JAY FEATHER Towables 2021

Бренды по названию

Популярные бренды