Jayco Eagle TT 2020, Руководство пользователя

Страница: 56 / 201

Section 4: Vehicle Operation
54
Method 2
The tongue jack can also be overridden by removing the
rubber plug to the right of the touch screen in the com-
partment on top of the tongue jack. Use a ratchet wrench
and insert a 3/8” square drive extension into the square
hole located inside the plastic cover.
Rear Leveling Jack Leg Override
The rear leveling jack legs can be manually overridden as
well. There is a plastic plug located on each leg motor.
Remove the plastic plug to reveal a 5/16” hex adapter.
Use an electric drill with a 5/16” socket to manually raise or lower each rear leg.
Stabilizer Jack Manual Override
Electric stabilizer jacks can be overridden manually also. To manually operate the stabilizer
jacks, use a drill with a 3/4” socket and put it on the 3/4” nut on the end of the stabilizer jack.
Refer to the manufacturer’s owner manual in your warranty packet for further information
regarding troubleshooting, error codes, and care and maintenance.