Jayco EAGLE FW HT 2020, Руководство пользователя

Страница: 49 / 201

Section 4: Vehicle Operation
47
Entrance Door
Always hold onto the entrance door when opening or closing it. Damage caused because
you failed to do so is not covered by the
Limited Warranty.
The entrance screen door may be equipped with a slide panel that allows access to the en-
trance door handle and locks. The entrance door may also be equipped with both a regular
door lock and a dead bolt lock.
Keys
Several keys are provided when you purchase your vehicle. Most keys have an individual
key number stamped on the plate. Record these key numbers and keep the information in a
safe place. You can order a key blank from your dealer to have duplicate keys made. If you
lose the keys, contact your dealer or a locksmith for assistance.
Make sure the entrance door is completely closed and locked when traveling.
Locking the door helps prevent it from opening unintentionally and keeps in-
truders from your recreation vehicle.

NOTE: Locks on entrance and baggage doors need biannual lu-
brication using a light coat of silicone spray. Conditions such as rain,
salt, dust and pollution may increase the maintenance needs.
Step operation
1. Open the entrance/screen door all the way.
2. Twist the locking handle to release the steps from
the locked position on the door frame (
A
).
3. Lower the step assembly to the ground
(B)
.
4. Adjust the feet to stabilize the steps ( C ).
Step storage
5. Fold the handrail at the door out of the way or re-
move the optional step handrail (if so equipped).
6. Retract adjustable feet ( C
) if necessary to fit in
-
side the doorway.
7. Lift the steps and rotate up into the doorway.
8. Steps will automatically latch into brackets on
each side of the door frame as they are lifted in
place.
9. Close the entrance/screen door