learn to solder:
Owl Badge Kit
Cat no.
KM1092
1
Thank you for purchasing the Owl Badge Kit.
Here’s a great way to get started with soldering, learn
a little about electronics, and end up with a really fun
wearable badge at the end!
This kit is part of a range of wearable badges designed
exclusively by Jaycar. Each project is powered by a
small CR2032 Lithium coin battery (Not included. We
recommend, SB2522), and the badges include a lapel
pin so you can wear it too.
Each of the designs has a different look and feel, while
the electronics involved is slightly different in each one,
so you’ll learn more about electronics and how it works
even if you build them all!
Before you start:
Before you start building your project, open up the package
and lay out the contents to ensure you have them all based
on the parts list.
You should also prepare a clean workspace and get all of the
tools needed, which we will discuss on the next page.
learn to solder:
Owl
Badge Kit
WITH TOUCH-ACTIVATED LED EYES
QTY CAT. NUMBER PRODUCT
PCB MARKING
1
Circuit Board
-
1
Lapel Pin
-
2
ZD0150
5mm Red LEDs
1
PH9238
CR2032 Battery Holder
1
RR0556
220Ω Resistor (Red-Red-Brown-Gold)
1
ZT2298
2N2222 Transistor
ADDITIONAL PARTS REQUIRED
(Not included)
1
SB2522
CR2032 Battery
Kit contents:
Disclaimer: Content can change without prior notice. Please visit the website page for the most up-to-date information.
