Note: Wireless password is “1234567890”.
1.5 Click on the icon
in the App list of the smartphone or tablet to open it. Now you can preview the
image sent by the camera on the phone or tablet..
Waterproof Case
Before sealing the waterproof case, keep the camera housing’s rubber seal clean, a single hair or grain of
sand can cause a leak. You can test by closing the case without inserting the camera. Submerse the case
completely in water for about a minute. Remove the case from the water, dry off its exterior with a towel,
and then open the case. If the interior is dry, the case is safe for use under water.
Remember to put the Mode Switch in your desired recording position before inserting the camera in the
waterproof case. There are no external buttons for the Mode Switch.
After use in salt water you will need to rinse the outside of the housing with fresh water and then dry. This
will prevent corrosion of the hinge pin and salt buildup in the seal, which can cause failure.
29
