Jaycar Electronics DS-8704HI-S, Руководство пользователя

Страница: 64 / 136

64
5.4.2 Day and Time Display Mode
You can setup display properties for each camera, including display status, position
and format. Of course, you can copy the properties of one camera to all cameras.
In “Image Setup” menu as following, select one camera:
Display mode: There are several display modes: Opaque&Steady,
Transparent&Steady, Transparent&Flashing, Opaque&Flashing,
Move “Active Frame” to “OSD” item, you can select one mode.
Display position and format:
Move “Active Frame” to “Position” button on the right
side of “OSD”, press
[ ENTER ] to enter into setup image, you can find there are 22*18 (for
NTSC, 22*15) small panes, and OSD position is in red. You can use [

] [

] [

] [

] keys
to move the OSD position.