Jaycar Electronics DS-8704HI-S, Руководство пользователя

Страница: 101 / 136

101
Add preset number: You can input preset number (among 1-128) in the edit box.
Then press “Adjust” button to enter into PTZ control interface. In PTZ control interface,
you can use direction keys to adjust PTZ position, and use [ IRIS+ ] [ IRIS- ] [ FOCUS+ ]
[ FOCUS- ] [ ZOOM+ ] [ ZOOM- ] keys to adjust iris, focus and zoom. After you finish
adjusting, press [ ENTER ]
, then press “Save” button to save the preset number. You can
repeat this step to setup other preset numbers.
Aft
er you setup all preset numbers, press “Return” button to return “PTZ” menu. In
“PTZ” menu, press “Confirm” button to save all parameters.
Delete preset number:
In “Preset” setup menu, input one preset number, press
“Delete” button, you can delete this preset number.
After deleting, press “Return” button to “PTZ” menu. In “PTZ” menu, press “Confirm”
button to save all modification.
Please make sure the PTZ you are using can support preset function.
5.14.5 Sequence Setup
Each sequence is made up of several Tour points. Each Tour point includes one
preset number, dwell time and dwell speed. Please make sure the PTZ you are using can
support sequence function before you start to setup. You can save 16 sequences.