AAA-055-00187
22
13
PRE-OPERATION CHECKLIST
Efficient and safe operation of your Jaylor mixer requires that each operator reads and understands all
operating procedures and related safety precautions. A pre-operation checklist is provided for the
operator. Photocopy and use this checklist before every use of your Jaylor mixer. It is important that this
checklist is followed for personal safety and maintaining good mechanical condition of the machine.
Before operating the machine:
Lubricate the machine as outlined in
Section 27.5
.
Use a tractor of adequate power and capacity to operate the machine.
Ensure machine is properly attached to the tractor. Be sure retainer is installed in drawbar pin and
safety chains are attached.
Check that PTO driveline is locked to the tractor shaft and driveline guard is chained to the frame.
Check that hydraulic reservoir on the tractor is filled to required specifications.
Check oil level and condition in the planetary gearboxes. Be sure there are no leaks. Stop leaks
before continuing.
Inspect all hydraulic lines, hoses, fittings, and couplers for tightness. Use a clean cloth to wipe any
dirt from couplers before connecting to the tractor.
Check that tires are inflated to their specified pressure. Check that wheel nuts are tight.
Check that augers rotate freely. Remove all string, twine, or other entangled material.
Close and secure all guards and safety devices.
Check that machine is clean and free of debris.
DANGER:
Take care not to come in contact with auger knives. Contact with a knife could
result in deep laceration and severe hemorrhaging.
