Javad TRIUMPH-VS Скачать руководство пользователя | Manualshive

Страница: 91 / 96

background image

Appendix C

91

www.javad.com

S

AFETY

W

ARNINGS

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Clean only with a damp cloth.

• Do not block any of the ventilation openings. Install in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a pole, cart, stand, or tripod, specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, or has been dropped.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall be

placed on the apparatus.

General Warnings

JAVAD GNSS receivers are designed for survey and survey related uses (that is, surveying coordinates,
distances, angles and depths, and recording such measurements). This product should never be used:

• Without the user thoroughly understanding operator’s manual.

• After disabling safety systems or altering the product.

• With unauthorized accessories.

• Without proper safeguards at the survey site.

• Contrary to applicable laws, rules, and regulations.

«
...
89
90
91
92
93
...
»

Содержание TRIUMPH-VS

































































































Отзывы:

Нет отзывов

Похожие инструкции для TRIUMPH-VS

Бренд: Galaxy Страницы: 12

Бренд: Galaxy Страницы: 11

Sky Champion S-20R

Бренд: Hallicrafters Страницы: 5

Бренд: MAC Audio Страницы: 12

Бренд: Naxa Страницы: 8

Бренд: Yamaha Страницы: 8

Бренд: Yaesu Страницы: 5

Бренд: Icom Страницы: 47

Бренд: R.V.R. Electronica Страницы: 40

Бренд: Zenith Страницы: 32

Бренд: AAS Страницы: 4

Бренд: Exsys Страницы: 2

Бренд: AFi Страницы: 4

Бренд: Belkin Страницы: 40

Бренд: Omega Страницы: 2

SAN FRANCISCO RDM 127

Бренд: Blaupunkt Страницы: 32

Бренд: Jensen Страницы: 18

Бренд: Jensen Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды