Javad JNSGyro-4T, Руководство оператора

Страница: 38 / 116

2-8 JNSGyro-4T Operator’s Manual www.javad.com
C O N F I G U R A T I O N
JNSGyro-4T Configuration
2
Figure 2-7. Receiver Configuration – MinPad Tab
If your jobsite is in an area that has obstructions (buildings, trees, etc.), and/or
the antenna location is near reflective objects, configure the board to reduce
errors from these sources.
4.
Click the Advanced tab on the Receiver Configuration screen and then
click the Multipath Reduction subtab. Enable the following boxes, and
click Apply (Figure 2-8 on page 2-9):
• Code multipath reduction
• Carrier multipath reduction