Javad HPT901BT, Руководство пользователя

Страница: 30 / 44

Command Line Interface
Identification and Diagnostics Commands
30 www.javad.com
Firmware =2.2.32
BootLoader =4.03
4.2. STATE
The STATE command is used to check the state of the wireless link.
STATE [ Parameter Name ][/?]
The STATE command without Parameter Name indicates all values:
Region =1
Tx =915000000
Rx =915000000
T=46.00
4.3. IC
The IC command prints string:
IC: 3504A-FH915
@00
4.4. FCC ID
The FCC ID command prints string:
FCC ID: WJ4FH915
@00
4.5. GTX
The GTX command allows get from port the Number of transmitted bytes.
GTX [ Parameters List ]
Parameter Name Short Description
Region 0-EU; 1-USA; 2-Australia
Tx Displays the initial frequency of the transmitter
Rx Displays the initial frequency of the receiver
T -30°C to 100°C – Displays the temperature inside of enclosure
Parameter List Short Description
0 0 – Disable send to port the Number of the transmitted bytes (a default setting).