manualshive.com logo in svg

Javad HPT402, Руководство оператора

Поделиться
Скачать
Javad HPT402 Скачать руководство пользователя страница 17

Configuration

Connecting HPT402 and Computer

Power supply requirements

17

www.javad.com

     

 

 

         

                                                                                                                           

    

  

 

3. Follow the on-screen installation instructions. Click Next to continue, Back to get back to

previous step, or Cancel to quit the installation.

4. Keep the default installation location or select a new location. 

5. Click Finish to complete the installation.

6. If desired, create a shortcut on the computer’s desktop for quick access to ModemVU.

To uninstall ModemVU use the Start menu on your computer:

1. Navigate to the location of the ModemVU program and double-click the Setup.exe icon. 

2. Follow the on-screen installation instructions.

2.4. Connecting HPT402 and Computer

To configure, or maintain HPT402, you need to connect the modem and a computer using an
Accessory Data-Ser-Pwr Cable, DB9/DB15/SAE (1,8m), p/n14-578108-02.

Figure 2-2. Accessory Data-Ser-Pwr Cables DB9/DB15/SAE

Once you have established a connection between the modem and the computer, you will be able
to:

• Configure the modem and its components

• Send commands to the modem

• Use ModemVU to load new firmware to the modem

Содержание HPT402























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды