Jatontec JT8500D, Руководство администратора пользователя

Страница: 13 / 36

Page 13

Advanced
In this menu, you can configure advanced options for the CPE operation.
Fast scan will allow you to quickly connect to good cell when they are first found instead of
search the best cell. The ZUC encryption support is only required when your core network
(EPC) force to use the ZUC encryption for access authentication. The operation mode allows
you to select the UE capability for receiving and transmitting. Depending on the hardware
implementation, 4x4 MIMO or 2x2 MIMO & CA can be selected for downlink operation. If the
RF hardware supports 2TX, then 2Tx operation can be enabled.
In addition, the PSM timer and location service UE settings can also be configured for
advanced users. Default settings should be used for normal operation.