Jatontec JT6300D, Руководство администратора пользователя

Страница: 8 / 37

Page 8
www.jatontec.com
2 LED Display
Type
LED Function Description
ODU
PWR Power indicator Solid green
– Device is power on.
SYS System run indicator Solid green
– Device is in normal operation.
SIM SIM card indicator
Light is on
– SIM card state is ready,
Blinking Green
– SIM card is error.
LINK LAN port status Solid Green
– LAN port is up.
ACT LAN port status Blinking Green
– LAN data transmission.
RF
(5LEDs)
RF Signal Strength
5 level signal strengths indication by 5 green
LEDs.
1st Green LED: -115dBm < RSRP
2nd Green LED: -115dBm <= RSRP < -105dBm
3rd Green LED: -105dBm <= RSRP < -95dBm
4th Green LED: -95dBm <= RSRP < -85dBm
5th Green LED: -85 <= RSRP

RF Signal Adjustment
After the CPE outdoor unit has installed, the direction of antenna’s azimuth and pitch angle needs to
adjust for the best signal strength. In near line of sight condition, the CPE will have the best signal
when the antenna is directly pointing the base station.
User can adjust the holder to change the direction and angle of the antenna while observing the RF
LED on the outdoor unit which indicates the signal strength.