Jatontec JT4300M, Руководство администратора пользователя

Страница: 8 / 52

Page 8

LED Display
Type LED Function Description
IDU
SYS Power indicator Green color
– Device is powered on.
NET WAN port status Blinking green
– The data is in transmission.
SIG RF signal indicator
Red: RSRP < -118dBm
Green: -118dBm <= RSRP < -105dBm
Blue: -105dBm <= RSRP
2.4G & 5G Wi-Fi indicator Light is on
–2.4G & 5G Wi-Fi is on.
LAN1&LAN2 LAN port status
Solid green
– LAN port is up.
Blinking green
– LAN data activity in progress.
Line
(Optional)
POTS line status
OFF
– Line is not registered or provisioned.
Green Color
– The line is ready and registered
Green Blinking
– Voice Call in progress
Type LED Function Description
ODU
PWR Power indicator Solid green
– Device is power on.
SYS System run indicator Solid green
– Device is in normal operation.
SIM SIM card indicator
Light is on
– SIM card state is ready,
Blinking Green
– SIM card is error.
LINK LAN port status Solid Green
– LAN port is up.
ACT LAN port status Blinking Green
– LAN data transmission.
RF
(5LEDs)
RF Signal Strength
5 level signal strengths indication by 5 green LEDs.
1st Green LED: -115dBm < RSRP
2nd Green LED: -115dBm <= RSRP < -105dBm
3rd Green LED: -105dBm <= RSRP < -95dBm
4th Green LED: -95dBm <= RSRP < -85dBm
5th Green LED: -85 <= RSRP
3. Managing CPE Device
The JT4300M offers rich management features which facilitate the task of service provider. It
supports local management access, Telnet, WEB, and centralized remote OTA configuration,
upgrades management and device monitoring via standard TR-069 ACS systems. The following
describes the basic procedures for configuring the device for LTE operation.

WEB Login
It is a preferred to setup the CPE using a Web browser from a local PC connected to device LAN
port. The operator should ensure that the connected PC has acquired IP address via DHCP from
the device. After IP connectivity is established between the PC and CPE device, the operator