Jatco RE4F04B, Руководство пользователя

Страница: 447 / 708

TROUBLE DIAGNOSIS
AT-447
[RE5F22A]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Revision: November 2006 2006 Altima
Cruise Test - Part 1
ECS009D3
1.
CHECK STARTING OUT FROM D1
1. Drive the vehicle for about 10 minutes to warm up the engine oil and A/T fluid.
Appropriate temperature for the A/T fluid: 50 - 80
°
C (122 - 176
°
F)
2. Park the vehicle on a level surface.
3. Move selector lever to “P” position.
4. Start the engine.
5. Move selector lever to “D” position.
6. Press the accelerator pedal about half way down to accelerate the vehicle.
With CONSULT-II
Read off the gear positions.
Starts from D1?
Yes >> GO TO 2.
No >> Enter a check mark at “Vehicle cannot be started from D1” on the diagnostics worksheet, then
continue the road test.
2.
CHECK SHIFT-UP D1
→
D2
Press down the accelerator pedal about half way and inspect if the vehicle shifts up (D1
→
D2) at the appropri-
ate speed.
●
Refer to AT-450 .
With CONSULT-II
Read the gear position, throttle degree of opening, and vehicle speed.
Does the A/T shift-up D1
→
D2 at the correct speed?
Yes >> GO TO 3.
No >> Enter a check mark at “A/T does not shift D1
→
D2” on the diagnostics worksheet, then continue
the road test.
3.
CHECK SHIFT-UP D2
→
D3
Press down the accelerator pedal about half way and inspect if the vehicle shifts up (D2
→
D3) at the appropri-
ate speed.
●
Refer to AT-450 .
With CONSULT-II
Read the gear position, throttle degree of opening, and vehicle speed.
Does the A/T shift-up D2
→
D3 at the correct speed?
Yes >> GO TO 4.
No >> Enter a check mark at “A/T does not shift D2
→
D3” on the diagnostics worksheet, then continue
the road test.
4.
CHECK SHIFT-UP D3
→
D4
Press down the accelerator pedal about half way and inspect if the vehicle shifts up (D3
→
D4) at the appropri-
ate speed.
●
Refer to AT-450 .
With CONSULT-II
Read the gear position, throttle degree of opening, and vehicle speed.
Does the A/T shift-up D3
→
D4 at the correct speed?
Yes >> GO TO 5.
No >> Enter a check mark at “A/T does not shift D3
→
D4” on the diagnostics worksheet, then continue
the road test.