Cleaning the outer casing
If necessary the outer casing can be cleaned using a damp cloth.
Care must be exercised so that the heat pump is not scratched when
cleaning. Avoid spraying water into the grilles or the sides so that water
penetrates into JÄSPI Inverter Nordic. Prevent JÄSPI Inverter Nordic coming
into contact with alkaline cleaning agents.
In event of long power cuts
In the event of prolonged power failures it is recommended that the part
of the heating system located outdoors is drained. Your installer has in-
stalled a shut off and drain valve to facilitate this. Call and ask your installer
if you are unsure.
Silent mode
The heat pump can be set to "Silent mode", which reduces the heat pump’s
noise level. This function is useful when JÄSPI Inverter Nordic must be
placed in noise-sensitive areas. The function should only be used for limited
periods, because JÄSPI Inverter Nordic might not reach its dimensioned
power.
Updating the software
Information about updating software can be found in the Installer
Manual for your indoor module or control module.
13
JÄSPI Inverter Nordic
Chapter 4 |
Maintenance of JÄSPI Inverter Nordic
