Controls
4
Front view
1.
Operating panel: To set the parameters.
2.
“+” output terminal
3.
“-” output terminal
4.
Control terminal: To connect the signal wire of the TIG torch trigger.
5.
Gas terminal: To connect the gas hose of the TIG torch.
6.
Handle
Rear view
7.
Power switch: Power ON/OFF switch.
8.
Warning sign
9.
Power input: Power input cable.
10.
Cooling fan
11.
Gas inlet: For shield gas input.
Control Panel
1.
Display screen
2.
Welding parameter selecting key
3.
Operation mode selecting key
4.
Welding parameter adjusting knob: The parameter adjusting encoder is
used to adjust the parameters, and parameters can be adjusted by turning the
knob clockwise or counterclockwise.
5.
Welding mode selecting key
7
