Jasic EVOLVE200 PLUS, Руководство пользователя

Страница: 20 / 62

EVOLVE200 PLUS USER MANUAL
18
2.6 MMA welding function instructions
2.6.1MMA welding connection caption
Connect the electrode holder to the positive polarity and the earth clamp plugs to the negative polarity.
2.6.2 VRD set and instructions
This function reduces the output no-load voltage at
a value less than 25V in a very short time.
It increases the safety conditions of the machine
user: the no-load voltage is not dangerous but
contact through human body and live parts of earth
cable and electrode holder can cause a shock with
loss of equilibrium control or similar.
The symbol “VRD ON” means that VRD protection
is active with an output no-load voltage equal to
15V.
When “VRD” feature is off, an icon led shows
voltage greater than 25V.
VRD ON: The reduction of the output voltage will have after 200msec of the stop welding.
VRD OFF: The reduction of the output voltage will have in every case after 30sec of stop welding.
VRD Switch: In MMA mode, press the EXTRA Button to enter advanced settings and switch VRD ON / VRD
OFF.
Electrode Positive
Electrode Negative