Jasic EVO 2.0 EM-160C, Руководство оператора

Страница: 77 / 82

77
STATEMENT OF WARRANTY
All new JASIC EVO2.0 welding, plasma cutters and multi - process machines are sold through our partner
Wilkinson Star Limited within the United Kingdom and Ireland shall be warrantied to the original owner,
non transferable, against failure due to defective materials or production.
The warranty period is 5 years following the date of purchase and we recommend you register your
product online within 28 days of purchase.
The original invoice is documentation for the standard warranty period. The warranty period is based
on a single shift pattern.
Defective units shall be repaired or replaced by the company at our workshop. The company may opt to
refund the purchase price (less any costs and depreciation due to use and wear).
The company reserves the right to alter the warranty conditions at any time with effect for the future.
A prerequisite for the full warranty is that products are operated in accordance with the operating
instructions supplied, observing the relevant installation and any legal requirements recommendations
and guidelines and carrying out the maintenance instructions shown in the operator manual. This should
be carried out by a suitably qualified competent person.
Warranty claims will only be accepted from authorised Jasic distributors and in the unlikely event of a
problem this should be reported to the technical support team to review the claim.
The customer has no claim to loan or replacement products whilst repairs are being performed.
The following falls outside the scope of the warranty:
•
Defects due to natural wear and tear
•
Failure to observe the operating and maintenance instructions
•
Connection to an incorrect or faulty mains supply
•
Overloading during use
•
Any modifications that are made to the product without the prior written consent
•
Software errors due incorrect operation
•
Any repairs that are carried out using non - approved spare parts
•
Any transport or storage damage
•
Direct or indirect damage as well as any loss of earnings are not covered under the warranty
•
External damage such as fire or damage due to natural causes e.g. flooding
•
Warranty repairs carried out by non - authorised Jasic distributors.
NOTE: Under the terms of the warranty, welding torches, their consumable parts, wire feed unit drive
rolls and guide tubes, work return cables and clamps, electrode holders, connection and extension
cables, mains and control leads, plugs, wheels, coolant etc. are covered with a 3 month warranty.
Jasic shall in no event be responsible for any third party expenses or expenses/costs or any indirect or
consequential expenses/costs.
Jasic will submit an invoice for any repair work performed outside the scope of the warranty. A quotation
for any non warranty will be raised prior to any repairs being carried out.
The decision about repair or replacement of the defective part(s) is made by Jasic. The replaced part(s)
remain(s) Jasic property.
Warranty extends only to the machine, its accessories and parts contained inside. No other warranty is
expressed or implied. No warranty is expressed or implied in regards to the fitness of the product for any
particular application or use.
If in our judgment you fail, or we suspect that you have failed, to comply with any term or provision of the
product warranty terms, we reserve the right to
deny you access to our services (or any part thereof).
For further information on Jasic product warranty terms and product warranty registration please visit:
www.jasic.co.uk/warranty - information
www.jasic.co.uk/warranty - registration