Key Chain Remote
RF
100
TXPS
Whole-Home Control
RF
2000
KINPS
Motion-Sensing Control
RF6
13
TX
Operating Instructions
1. Find the slot labeled HOUSE CODE on the back of the unit.
2. Set the HOUSE CODE to any one of the following settings:
NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting.
The transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus
transmitters and receivers to a different setting.
3. Set the CHANNEL by using the knob on front as shown.
NOTE: If you set your Wall Mount Control to CHANNEL 1, the unit can control
any receiver set to CHANNEL 1. If you set your Wall Mount Control to
CHANNEL 2, the unit can control any receiver set to CHANNEL 2 ... and so on.
IMPORTANT! A transmitter will control a receiver ONLY if they have the same
HOUSE CODE and CHANNEL settings.
4. Mounting
NOTE: Mounting the Wall Mount Control on masonry or metal walls may degrade the functional
range.
Tape Mounting
A. Make sure surfaces are free of dust, oil and other substances that could affect adhesion.
B. Attach the double-sided tape to back of the Wall Mount Control housing.
C. Press the tape firmly to the mounting surface.
Screw Mounting
A. Using a slotted screwdriver, remove the faceplate of the Wall Mount Control.
B. Place the detached back plate where desired and mark screw locations.
C. Insert the mounting screws into the back plate holes and screw into place.
D. Replace the Wall Mount Control faceplate.
5. Use the toggle button to activate the Wall Mount Control (ON/OFF operation). Make sure
to press firmly and for a minimum of 1 second for best results. An indicator lights RED when
a signal is sent.
6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the installation by using
the ON and OFF buttons.
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.
We would be happy to answer ALL of your questions. Visit us on the web at www.GESmartHome.com
to download application notes, manuals and to find out more about the GE SmartHome™ product line!
Specifications
Battery Type ............................................................................................................. Use ONLY A23 (12V) Alkaline
NOTE: The functional range will decrease as the battery wears out so make sure to replace the
battery every 6 months for best results.
*Functional range may be adversely affected by one or more of the following factors: weather, radio
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
GE is a trademark of the General Electric Company
and is used under license to
Jasco Products Company LLC,
311 N.W. 122nd Street,
Oklahoma City, OK 73114.
www.jascoproducts.com.
90 DAY LIMITED WARRANTY: Jasco Products Company warrants this product to be
free from manufacturing defects for a period of ninety days from the original date of
consumer purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to other
products that may be used with this unit. This warranty is in lieu of all other
warranties express or implied. Some states do not allow limitations on how long an
implied warranty lasts or permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This
warranty gives you specific rights, and you may also have other rights which vary
from state to state. If unit should prove defective within the warranty period, return
prepaid with dated proof of purchase to:
Jasco Products Company
311 N.W. 122nd
Oklahoma City, OK. 73114
Enclosed you will find
• (1) Wall Mount Control
• Double-Sided Tape / Screws
(for mounting)
•
12V A23 Battery (installed)
The GE Smart Remote Plus
advantage
Any transmitter in the GE Smart Remote Plus
product line is capable of controlling every
receiver—the ultimate in home convenience.
Control any number of light fixtures or
appliances from up to 150ft* away by
choosing the transmitter and receiver
combination that best suits your needs.
The following GE Smart Remote Plus receivers (sold separately) can be controlled by THIS transmitter:
The receivers above can also be controlled by the following GE Smart Remote Plus transmitters (sold separately):
IMPORTANT! These devices are NOT compatible with devices from other systems.
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.
Wireless Remote Transmitter
Indoor Outlet
RF
100
RXPS
Outdoor Outlet
RF
106
RXPS
Socket Adapter
RF
104
RXPS
Wall Switch
RF
102
RXPS
Wall Mount Control
RF
102
TXPS
INCLUDED!
1
2
3
4
5
6
7
8
User’s Manual
Expanding your system
The GE Smart Remote Plus
devices operate on any of 8 user-settable channels. The channels
are easy to set / adjust – with the simple turn of a knob. Set up your GE SmartHome
™
by
purchasing as many transmitters and receivers as you need. The following table is just one
example of how you can configure your Smart Remote Plus
system:
Area
CH Transmitters
Receivers
Bedroom
1 Bedside - Wall Mount Control
(2) Bedside Lamps - (2) Socket Adapters
Entrance - Wall Mount Control Corner Torchiere - Indoor Outlet Adapter
Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Living Room 2 Coffee Table - Timer/Controller (2) End Table Lamps - (2) Socket Adapters
Entrance - Wall Mount Control Overhead Light Fixture - Wall Switch
Entertainment System - Indoor Outlet Adapter
Christmas Tree - Indoor Outlet Adapter
3
Window Santa - Indoor Outlet Adapter
Lighted Poinsettia - Indoor Outlet Adapter
Basement
4 Entrance - Wall Mount Control (4) Overhead Can Fixtures - (4) Socket Adapters
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters
Garage
5 Entrance - Wall Mount Control (2) Fluorescent Fixtures - (2) Outdoor Outlet Adapters
Overhead Light Fixture - Wall Switch
Outdoor
6 Foyer- Wall Mount Control
Entry Light - Wall Switch
Car Keys - Key Chain Remote
Coach Lantern - Wall Switch
7
Christmas Lights - Outdoor Outlet Adapter
Yard Santa - Outdoor Outlet Adapter
Kitchen
8 Entrance - Wall Mount Control
Coffee Maker - Indoor Outlet Adapter
1 2
ON
GE SmartSecurity
™
System
GE Smart Remote Plus
Transmitter
CONTROL
ANY NUMBER OF RECEIVERS IN UP TO 8 AREAS OF YO
UR HOME
