Device Overview
How to wear your Elite+ HR Fitness Band?
1
2
3
4
Change the wristband
Put on the wristband with the screen facing up and the band
wrapped around your wrist. Align the METAL CLASP along
the band to find the hole that best fits your wrist size.
*Please make sure to fasten with the METAL CLASP and not
the smaller plastic clasp.
Press down on the METAL CLASP into the holes of the wristband
until you hear a click indicating that the band is securely fastened
1.
2.
User Manual
EN
Jarv Elite +HR Fitness Band and Smart Watch
For warranty
information
,
troubleshooting
or other
customer service
needs please visit
www.jarvmobile.com
Register your product online at www.jarvmobile.com to
receive a free 6 month warranty extension
Fasten your Elite +HR Fitness Band
with the metal clasp
Charge your Elite +HR Fitness Band
To charge your Elite +HR Fitness Band, place it in the charging
box at the other end of the USB cable. Close the box afterwards,
and make sure the Elite +HR Fitness Band is securely covered
and that the charging contacts are properly aligned. Plug the
USB connector to either a PC or power adapter to start charging.
Initial charging time is approximately 2 hours.
Spread open both bands with the screen facing up, and press down
the screen with your thumb until the core comes off the wristband.
Insert the core with screen facing up into the notch from below the
wristband. Button up the clasp on the side of the band with 2 holes.
Please note that the charging contact should be near the clasp.
Attach your Elite +HR Fitness Band
to your wrist
*Failure to follow the instruction above might cause damage to the device
