FJ200 -CT USER`S MANUAL
V3.0
Page 14
Main menu
The control panel of microprocessor unit is clear and easy to use. If no button is pressed it
will show main menu with all necessary data.
On the left side of control panel process
setpoints are displayed when process is
running, otherwise only current clock is
shown.
On the right side of control panel, milk
temperature is displayed in large font.
Below is information about the stirrer and
process state (heating, cooling)
There is also an icon displayed for each
heater and cooling valve when activated.
When the process is running on left side is
information about current phase (1-4),
Setpoint temperature and duration time
(elapsed time – set time)
Settings menu
The settings menu is entered when right key
is pressed in main menu configuration.
First page of settings menu is a setpoint
table of temperatures [°C] and times [min].
With pressing up key, value is increased by
1 unit.
With pressing down key, value is decreased
by 1 unit.
With pressing right key, you switch to
another item.
0
20
40
60
80
100
0
50
100
150
200
250
Phase 1
Phase 2
Phase 3
Phase 4
