Janome Memory Craft 550E, Инструкция

Страница: 24 / 84

22
r
e
c b
y
v
z
Attaching the Embroidery Hoop to the Machine
To attach:
z
Raise the presser foot.
Turn the handwheel toward you to raise the needle at
its highest position. Turn the power switch on.
If the carriage is not at the home position, the caution
message appears to move the carriage to the home
position.
Press OK key to move the carriage to the home
position.
q
OK key
Select or edit the desired pattern and press OK key.
Ready to Sew screen appears and the carriage moves
to the start position.
Press the lockout key to lockout the machine.
w
Lockout key
x
Place the prepared hoop on the machine.
Position the hoop by aligning the notches of the hoop
with the carriage pins.
e
Notch
r
Carriage pin
t
Carriage
y
Lever
x
c
Shift the lever in the direction of the arrow.
y
Lever
v
Attach the hoop by pushing it against the carriage
pins.
b
Push the lever in the direction of arrow to lock the
hoop in place.
To remove:
z
Raise the presser foot. Turn the handwheel toward
you to raise the needle at its highest position.
Press the lockout key to lock the machine.
x
Shift the lever in the direction of the arrow and remove
the hoop.
y
Lever
y
w
q
z x
t
r y
e
e
CAUTION:
• Be careful not to place the excess of fabric between
the carriage and machine body
u
.
• Never try to move the carriage by hand or touch the
carriage while it is moving.
u
r
r
e
e
y