Janome 5060DC, Инструкция

Страница: 8 / 56

4
q
t
e
r
u
y
w
i
e
t
r
w
q
SECTION II. GETTING READY TO SEW
Connecting the Power Supply
• Using the foot control
Turn off the power switch
q
.
Insert the foot control plug
w
into the foot control jack
e
.
Insert the machine plug
r
into the power inlet
t
.
Insert the power supply plug
y
into the wall outlet
u
.
Turn on the power switch
q
.
The foot control sign
i
will be displayed when the foot
control is connected to the machine.
q
Power switch
w
Foot control plug
e
Foot control jack
r
Machine plug
t
Power inlet
y
Power supply plug
u
Wall outlet
i
Foot control sign
• Using the start/stop button
Turn off the power switch
q
.
Insert the machine plug
w
into the power inlet
e
.
Insert the power supply plug
r
into the wall outlet
t
.
Turn on the power switch
q
.
q
Power switch
w
Machine plug
e
Power inlet
r
Power supply plug
t
Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.
WARNING:
While in operation, always keep your eyes on the
sewing area and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run inadvertently.
Before Using Your Sewing Machine
Before using your sewing machine for the first time,
place a scrap of fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away
any oil which may appear.