Janome 15, Инструкция

Страница: 9 / 40

7
Removing and Attaching the Presser Foot
Holder
Presser Foot Lifter
The presser foot lifter raises and lowers the
presser foot.
You can raise it about 1/4˝ (0.6 cm) higher than
the normal up position for easy removal of the
presser foot, or to help you place heavy fabric
under the foot.
q
Lowered position
w
Normal up position
e
Highest position
Changing the Presser Foot
CAUTION:
Turn OFF the power switch before changing
the foot. Always use the proper foot for the
selected pattern. The wrong foot can cause
the needle to break. Do not push the lever
down to prevent it from being broken.
To attach:
Insert the presser foot pin
q
into the slit
w
of the
presser holder and push the presser foot to lock it
in place.
To remove:
Pull the foot in the direction of arrow to remove
the presser foot.
CAUTION:
Turn OFF the power switch before detaching or
attaching the presser foot holder.
To remove:
Remove the setscrew by turning it
counterclockwise with a screwdriver and remove
the presser foot holder from the presser bar.
To attach:
Match the hole in the presser foot holder with the
threaded hole in the presser bar. Fit the setscrew
into the hole. Tighten the screw by turning it
clockwise with a screwdriver.
q
Setscrew
w
Presser foot holder
e
Hole
r
Threaded hole
q
w
e
e
w
w
q
q
w
e
r