30
Display
Auto display
When turned on, the UMG 510 changes the display
successively through user selected displays. Use
the "display conf"
menu to select
which displays
should be shown
automatically.
Slow display
If turned on, the measured value display rate is
slowed down. This setting does not affect the inter-
nal data processing.
Display configuration
Use this setting to select a default display which will
be shown after an
idle time. Further-
more you can se-
lect which displays
will be shown au-
tomatically if "Auto
display" is turned
on.
Use the arrow
keys to select the
desired measured
value display.
Press Enter (6) to
enter the small
window menu.
Inside the small window menu select the current dis-
play to be included in the automatic display se-
quence, manual reachable and default display.
If a default display is selected it will be shown after
an idle time.
This screen is included in the automatic
display sequence.
This screen is manually reachable us-
ing the arrow keys.
This screen is used as default display.
Initial operation
Содержание UMG510
Страница 39: ...39 Technical data...
Страница 40: ...40 Dimension sketch Cut out 138 0 8 x 138 0 8 mm Back view Patchkabel Technical data...
Страница 42: ...42 Connection example Technical data...